Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)

Print Back
These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load.
  • Power off activated type electromagnetic brake
  • Conforms to safety standards and global power supply voltages

RoHS Version Available

 

Unit of Measure

Specifications

Product Line

 - Oriental Motor ®

Motor Type

 - Electromagnetic Brake - Reversible

Frame Size

 - 3.54 in

Output Power

 - 60 W (1/12 HP)

Voltage (VAC)

 - Single-Phase 220/230 VAC

Frequency (Hz)

 - 60 50

Current

 - 0.59 A [230 VAC, 50 Hz] 0.61 A [220/230 VAC, 60 Hz]

Shaft/Gear Type

 - Round Shaft (No Gearhead)

Output Shaft Diameter

 - 12 mm

Type

 - Lead Wire

Electromagnetic Brake

 - Equipped

Rated Torque

 - 3.5625 lb-in [60 Hz]  4.3125 lb-in [50 Hz]  

Rated Speed (rpm)

 - 1200 [50 Hz] 1450 [60 Hz]

Permissible Overhung Load

 - 0.39 in. from Shaft End = 54 lb0.79 in. from Shaft End = 60 lb

Permissible Thrust Load

 - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass.

RoHS Compliant

 - Yes

Safety Standards

 - UL CSA CCC EN CE

CE Marking

 - Low Voltage Directives

Insulation Resistance

 - 100 M Ω or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity.

Dielectric Strength

 - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity.

Temperature Rise

 - Temperature rise of windings are 176°F (80°C) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (7.87 in. x 7.87 in.)[0.20 in. (thickness)]

Insulation Class

 - Class B (266°F [130°C])

Overheat Protection

 - Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 179.6°F ± 27°F (82°C ± 15°C)

Ambient Temperature Range

 - 14°F ~ 104°F (-10°C ~ 40°C) (nonfreezing)

Ambient Humidity

 - 85% maximum (noncondensing)

Degree of Protection

 - IP40

List Price

 - $312.00

Brake Specifications

Voltage (Brake)

 - Single-Phase 220/230 VAC

Current (Brake)

 - 0.07 A

Input

 - 10 W

Static Friction Torque

 - 71 oz-in

Dimensions


 

Capacitor


 

Connection


 

System