Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)

Print Back
The BXII Series brushless DC motor and driver packages offer high performance and high function, now up to 4,000 r/min, for a wide range of applications. The driver is user friendly with easy wiring, data setting and LED display on the front panel and is compact and easy to mount.
  • Speed Control, positioning, torque limiting
  • Speed Control Range: 2 ~ 4000 r/min (digital setting), 30 ~ 4000 r/min (analog setting)
  • MEXE02 software (free download) or OPX-2A Control Module (sold separately)
  • Connection cables required (sold separately)

 

Unit of Measure

Specifications

Motor Type

 - Brushless DC Motor

Motor Frame Size

 - 4.09 in.

Output Power

 - 400 W (1/2 HP)

Power Supply

 - Single-Phase, Three-Phase 200-240 VAC

Frequency

 - 50 Hz60 Hz

Rated Input Current

 - 4.7 A (Single-Phase)
2.8 A (Three-Phase)

Shaft/Gear Type

 - Parallel Shaft Gearhead

Gear Ratio (X:1)

 - 30 :1

Output Shaft Diameter

 - 22 mm

Rated Torque

 - 290 lb-in

Electromagnetic Brake

 - Equipped

Brake Type

 - Power off activated type, automatically controller by the driver

Static Friction Torque

 - 184 oz-in

Variable Speed Range (r/min)

 - Digital setting: 0.07 ~ 133 r/min (2000:1)
Analog setting: 1 ~ 133 r/min (133:1)

Permissible Load Inertia

 - 21000 oz-in²

Permissible Overhung Load

 - 0.39 in. from Shaft End = 123
0.79 in. from Shaft End = 180 lb

Permissible Thrust Load

 - 67 lb

Max. Extension Length (m)

 - Motor and driver distance: 99.7 ft. (30.4 m)

Components

 - GFS6G30 [Gearhead] BXSD400-C [Driver] BXM6400M-GFS [Motor]

RoHS Compliant

 - These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

 - UL CSA CE

CE Marking

 - Low Voltage Directives EMC Directives

Insulation Resistance (Motor)

 - 100 M Ω or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity (except for encoder).

Insulation Resistance (Driver)

 - 100 M Ω or more when 500 VDC megger is applied between the power supply input terminal and the case, and between the power supply input terminal and the I/O terminal after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

 - Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity (except for encoder).

Dielectric Strength (Driver)

 - Sufficient to withstand 1.5 kVAC, 50 Hz applied between case and power supply input for 1 min. and 1.5 kVAC, 50 Hz applied between power supply input and the I/O terminal for 1 min. after continuous operation under normal ambient temperature and humidity.

Temperature Rise (Motor)

 - Temperature rise of the windings is 50°C (90°F) max. and that of the case surface is 40°C (72°F) max, measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity.

Temperature Rise (Driver)

 - Temperature rise of the heat sink is 50°C (90°F) max. measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity. [60°C (108°F) max. when drivers are installed in contact with each

Ambient Temperature Range

 - [Motor] 32°F ~ 122°F (0°C ~ 50°C), nonfreezing
[Driver] 32°F ~ 72°F (0°C ~ 40°C) when drivers are installed in contact with each other

Ambient Humidity

 - 85% max. (non-condensing)

Operating Atmosphere

 - No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum, or other special environments.

Altitude

 - Max of 10000 ft. (3000 m) above sea level

Insulation Class

 - UL/CSA Standards: 105 (A), EN Standards: 120 (E)

Degree of Protection

 - IP54 (excluding connectors) [Motor]
IP20 [Driver]

Driver Functions

 

 - Speed Control Mode

Speed Control Method (Select one of the following)

 - Digital Setting:
  • Control panel
  • MEXE02 software
  • OPX-2A (sold separately)

Analog Setting:
  • Internal speed potentiometer
  • External potentiometer or DC voltage, 0~10 VDC (1 mA min.)

Acceleration/Deceleration Time

 - Digital Setting: 0.000 ~ 30.00 s (rated speed, no load)
Analog Setting: 0.1 ~ 30 s (rated speed, no load)

Acceleration/Deceleration Time Setting Method

 - Digital Setting: Select one of the following methods: (Individual settings)
  • Control panel
  • MEXE02 software
  • OPX-2A (sold separately)

Analog Setting: Common to operating Data No. 0 and No. 1
  • Acceleration time potentiometer (ACC)
  • Deceleration time potentiometer (DEC)

Operation Data Setting Number

 - 16 Points

Operation During Motor Standstill

 - Operations can be selected when the motor is at standstill
  • Motor non-excitation (initial setting)
  • Position holding by servo control (motor excitation)

Other Operations

 - JOG operation, test operation, teaching (excluding MEXE02)

 

 - Position Control Mode

Travel Amount Setting Range

 - -8,388,608 ~ +8,388,607 step

Resolution

 - 0.72° (500 steps/rotation)

Operating Modes

 - Incremental or absolute

Operation Functions

 - Independent, linked, linked 2, sequential, direct

Positioning Accel/Decel Time

 - 0.000 ~ 30.00 s (rated speed, no load)

Positioning Operations

 - Continous operation, JOG operation, return-to-home operation, test operation, teaching

 

 - Torque Control Mode

Torque Limit Control

 - The motor's output torque can be limited in speed control mode and position control mode.

Torque Limiting Setting Range

 - 0 ~ 250%

Torque Limiting Setting Methods

 - Digital Setting: Select one of the following methods:
  • Control panel
  • MEXE02 software
  • OPX-2A (sold separately)

Analog Setting:
  • External Potentiometer or external DC voltage, external analog setting with 0~10 VDC (1 mA min).

Speed-Torque


 

Dimensions


 

 

Connection


 

System