Unit Conversion Tool
We're Here to Help
Business Hours - Monday to Friday, 8:30am EST to 5:00pm PST
U.S.A. Customers:
Customer Service - 1-800-418-7903
Tech Support – 1-800-GO-VEXTA (468-3982)
International Customers:
+1-847-871-5931 or
+1-310-715-3303
For Japanese:
1-800-746-6872 or
+1-310-715-3303
1-800-GO-VEXTA (468-3982)
A power controller developed for Oriental Motor's torque motors that allows for easy adjustment of torque. A perfect choice for winding applications, push-motion mechanisms and other situations where torque must be adjusted.
- Torque can be set using one of three methods; internal potentiometer, external potentiometer or external DC voltage
- Change between two levels by switching between the internal potentiometer and an external potentiometer/voltage
- Alarm output function
- Instantaneous bi-directional operation by CW/CCW signal switching
- Switching of signal input logic between sink and source
Specifications
Power Supply |
- Single-Phase 100/110/115 VAC ±10% 50/60 Hz Single-Phase 200/220/230 VAC ±10% 50/60 Hz |
Power Source for Control |
- 24 VDC ±10%, 100 mA or more |
Input Signals |
-
Photocoupler input, Input resistance 4.7 kΩ CW input, CCW input, INT/EXT switch input, Alarm reset input |
Output Signals |
-
Open collector output: 4.5 ~ 26.4 VDC or less, 40 mA or less. Alarm output |
RoHS Compliant |
- Yes |
Safety Standards |
- UL EN CE |
CE Marking |
- Low Voltage Directives EMC Directives |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the main circuit terminals and the control circuit terminals after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength |
- Sufficient to withstand 3.0 kVAC at 50 Hz or 60 Hz applied between the main circuit terminals and the control circuit terminals for 1 minute under normal ambient temperature and humidity. |
Ambient Temperature |
- 0 ~ 50°C (32 ~ 122°F) (non-freezing) |
Ambient Humidity |
- 85% or less (non-condensing) |
Degree of Protection |
- IP20 |
Features
Torque Setting Method |
-
Select one of the following methods:
|
Protective Function |
-
When any of the following is activated, the alarm signal will be output, the alarm LED will blink and the motor will stop.
|
Motor Cable Length |
- The distance between motor and power controller can be extended up to 20 m |
