ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
The BMU Series features a compact, high-power and high-efficiency brushless DC motor and is combined with an easy to use, easy to set speed controller. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance.
The BMU Series has a maximum speed of 4000 r/min. Speed ratio of 1:50 (80 to 4000 r/min) is achieved. Round Shaft and Combination-type Parallel Shaft Geared models are available in standard and IP65 rated versions.
| Items |
 BMU260A-A 60 W (1/12 HP) Brushless DC Motor Speed Control System Web Price $297.00
|
BMU260AP-A 60 W (1/12 HP) Brushless DC Motor Speed Control System Web Price $320.00
|
BMU260C-A 60 W (1/12 HP) Brushless DC Motor Speed Control System Web Price $297.00
|
BMU260CP-A 60 W (1/12 HP) Brushless DC Motor Speed Control System Web Price $320.00
|
 BMU460SA-5 60 W (1/12 HP) Brushless DC Motor Speed Control System Web Price $391.00
|
|||||
| Motor Frame Size | 2.36 in. | 2.36 in. | 2.36 in. | 2.36 in. | 3.15 in. | |||||
| Output Power | 60 W (1/12 HP) | |||||||||
| Power Supply | Single-Phase 100-120 VAC | Single-Phase 100-120 VAC | Single-Phase / Three-Phase 200-240 VAC | Single-Phase / Three-Phase 200-240 VAC | Single-Phase 100-120 VAC | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 5 :1 | |||||||||
| Output Shaft Diameter | 8 mm | 8 mm | 8 mm | 8 mm | 15 mm | |||||
| Degree of Protection (Motor) | IP40 | IP65 | IP40 | IP65 | IP40 | |||||
| Rated Torque | 1.69 lb-in | 1.69 lb-in | 1.69 lb-in | 1.69 lb-in | 7.90 lb-in | |||||
| Variable Speed Range (r/min) | 80 ~ 4000 | 80 ~ 4000 | 80 ~ 4000 | 80 ~ 4000 | 16 ~ 800 | |||||
| Permissible Load Inertia | 21 oz-in² | 21 oz-in² | 21 oz-in² | 21 oz-in² | 120 oz-in² | |||||
| Permissible Radial Load |
0.39 in. from Shaft End = 18 0.79 in. from Shaft End = 22 lb |
0.39 in. from Shaft End = 18 0.79 in. from Shaft End = 22 lb |
0.39 in. from Shaft End = 18 0.79 in. from Shaft End = 22 lb |
0.39 in. from Shaft End = 18 0.79 in. from Shaft End = 22 lb |
0.39 in. from Shaft End = 45 0.79 in. from Shaft End = 56 lb |
|||||
| Permissible Axial Load | 22 lb | |||||||||
| Permissible Axial Load | Half of motor mass or less | Half of motor mass or less | Half of motor mass or less | Half of motor mass or less | ||||||
| Speed Control Method (Select one of the following) | Digital Setting using the dial | |||||||||
| Number of Speed Settings | 4 | |||||||||
| Max. Extension Length (m) | 10.50 | |||||||||
|
|
||||||||||
