ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
The Brushless DC Motor and Driver Package BLH Series is a 24 VDC power supply input type, offering a wide speed range of 100 to 3000 r/min. A wide range of options are available to meet you application needs.
| Items |
 BLH015K-A 15 W (1/50 HP) Brushless DC Motor Speed Control System (24 VDC) Web Price $264.00
|
 BLH015K-5 15 W (1/50 HP) Brushless DC Motor Speed Control System (5:1 Gear Ratio) (24 VDC) Web Price $359.00
|
BLH015K-10 15 W (1/50 HP) Brushless DC Motor Speed Control System (10:1 Gear Ratio) (24 VDC) Web Price $359.00
|
BLH015K-15 15 W (1/50 HP) Brushless DC Motor Speed Control System (15:1 Gear Ratio) (24 VDC) Web Price $359.00
|
BLH015K-20 15 W (1/50 HP) Brushless DC Motor Speed Control System (20:1 Gear Ratio) (24 VDC) Web Price $359.00
|
|||||
| Motor Frame Size | 1.65 in. | |||||||||
| Output Power | 15 W (1/50 HP) | |||||||||
| Power Supply | 24 VDC | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 5 :1 | 10 :1 | 15 :1 | 20 :1 | ||||||
| Output Shaft Diameter | 6 mm | |||||||||
| Rated Torque | 0.44 lb-in | 2 lb-in | 3.90 lb-in | 6 lb-in | 7.60 lb-in | |||||
| Variable Speed Range (r/min) | 100 ~ 3000 | 20 ~ 600 | 10 ~ 300 | 6.7 ~ 200 | 5 ~ 150 | |||||
| Permissible Load Inertia | 2.70 oz-in² | 16 oz-in² | 77 oz-in² | 164 oz-in² | 270 oz-in² | |||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 11.2 lb | |||||||||
| Permissible Thrust Load | 6.70 lb | 6.70 lb | 6.70 lb | 6.70 lb | ||||||
| Permissible Thrust Load | The permissible thrust load should not be greater than half the motor mass. | |||||||||
| Speed Control Method (Select one of the following) | Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
| Number of Speed Settings | 2 | |||||||||
| Multi-Speed Setting Method |
Switching between 2 speeds One speed is set by the internal potentiometer (1 pc), while another speed is set by an external potentiometer (optional PAVR-20KZ) or by external DC voltage (0~5 VDC). |
|||||||||
| Instantaneous Stop | Yes | |||||||||
| Multi-Axes Control | Yes | |||||||||
| Alarm Output | Yes | |||||||||
| Power Input | DC | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Vertical Drive (Gravitational Operation) | No | |||||||||
| Max. Extension Length (m) | 2 | |||||||||
| RoHS Compliant | Yes | |||||||||
|
|
||||||||||
