ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
The AZ Series offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Requires AZ Series Driver.
| Items |
 AZM66AC 2.36 in. (60 mm) Mechanical Absolute Encoder, Closed Loop Stepper Motor Web Price $362.00
|
 AZM66MC 2.36 in. (60 mm) Mechanical Absolute Encoder, Closed Loop Stepper Motor Web Price $565.00
|
 AZM69AC 2.36 in. (60 mm) Mechanical Absolute Encoder, Closed Loop Stepper Motor Web Price $367.00
|
AZM69MC 2.36 in. (60 mm) Mechanical Absolute Encoder, Closed Loop Stepper Motor Web Price $571.00
|
 AZM66AC-TS3.6 2.36 in. (60 mm) Mechanical Absolute Encoder, Closed Loop Stepper Motor Web Price $519.00
|
|||||
| Frame Size | 2.36 in | |||||||||
| Motor Length | 2.83 in. | 4.65 in. | 3.84 in. | 5.65 in. | 4.53 in. | |||||
| Driver Voltage Input Power | AC | |||||||||
| Speed-Torque Characteristics |
 Speed - Torque Characteristics |
Speed - Torque Characteristics |
 Speed - Torque Characteristics |
Speed - Torque Characteristics |
 Speed - Torque Characteristics |
|||||
| Holding Torque | 170 oz-in | 170 oz-in | 280 oz-in | 280 oz-in | 255 oz-in | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Taper Hobbed Gear | |||||
| Gear Ratio (X:1) | 3.6 :1 | |||||||||
| Backlash | 35 arc min (0.59°) | |||||||||
| Lost Motion | ||||||||||
| Shaft | Single | |||||||||
| Electromagnetic Brake | Not Equipped | Equipped | Not Equipped | Equipped | Not Equipped | |||||
| Permissible Speed Range (r/min) | 0 ~ 833 | |||||||||
| Rotor Inertia | 2 oz-in² | 2.90 oz-in² | 4 oz-in² | 4.90 oz-in² | 2 oz-in² | |||||
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
| Safety Standards | UL CE | |||||||||
| Permissible Overhung Load | 0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb | 0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb | 0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb | 0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb | 0 in. from Shaft End = 27 lb0.2 in. from Shaft End = 30 lb0.39 in. from Shaft End = 33 lb0.59 in. from Shaft End = 37 lb0.79 in. from Shaft End = 40 lb | |||||
| Permissible Thrust Load | 2 lb | 2.80 lb | 3.10 lb | 3.90 lb | 9 lb | |||||
| Permissible Thrust Load | ||||||||||
|
|
||||||||||
