ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)
The AR Series adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AR Series Driver.
| Items |
 ARM46AC 1.65 in. (42 mm) Closed Loop Stepper Motor Web Price $137.00
|
 ARM46AC-T3.6 1.65 in. (42 mm) Closed Loop Stepper Motor Web Price $243.00
|
ARM46AC-T7.2 1.65 in. (42 mm) Closed Loop Stepper Motor Web Price $243.00
|
ARM46AC-T10 1.65 in. (42 mm) Closed Loop Stepper Motor Web Price $256.00
|
ARM46AC-T20 1.65 in. (42 mm) Closed Loop Stepper Motor Web Price $256.00
|
|||||
| Frame Size | 1.65 in | |||||||||
| Motor Length | 2.68 in. | 3.9 in. | 3.9 in. | 3.9 in. | 3.9 in. | |||||
| Driver Voltage Input Power | AC | |||||||||
| Speed-Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
|||||
| Holding Torque | 42 oz-in | 48 oz-in | 98 oz-in | 141 oz-in | 211 oz-in | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Taper Hobbed Gear | Taper Hobbed Gear | Taper Hobbed Gear | Taper Hobbed Gear | |||||
| Gear Ratio (X:1) | 3.6 :1 | 7.2 :1 | 10 :1 | 20 :1 | ||||||
| Backlash | 45 arc min (0.75°) | 25 arc min (0.417°) | 25 arc min (0.417°) | 15 arc min (0.25°) | ||||||
| Lost Motion | ||||||||||
| Shaft | Single | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Permissible Speed Range (r/min) | 0 ~ 500 | 0 ~ 250 | 0 ~ 180 | 0 ~ 90 | ||||||
| Rotor Inertia | 0.32 oz-in² | |||||||||
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
| Safety Standards | UL CSA EN CE | |||||||||
| Permissible Overhung Load | 0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | |||||
| Permissible Thrust Load | 1.03 lb | 3.30 lb | 3.30 lb | 3.30 lb | 3.30 lb | |||||
| Permissible Thrust Load | ||||||||||
|
|
||||||||||
