Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
1001 Knox Street
Torrance, CA 90502
1-800-GO-VEXTA (468-3982)

Print Back

The AR Series adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AR Series (DC Input) Driver.

  • 1.10 in. (28 mm) Frame Size
  • Closed Loop
  • Single or Double Shaft
  • Geared Type Available

 

arm24sak-img
Unit of Measure
Items arm24sak-img
ARM24SAK
1.1 in. (28 mm) Closed Loop Stepper Motor
Web Price $146.00
 arm24sak-img
ARM24SBK
1.1 in. (28 mm) Closed Loop Stepper Motor
Web Price $148.00
 arm24sak-t-img
ARM24SAK-T7.2
1.1 in. (28 mm) Closed Loop Stepper Motor
Web Price $299.00
 arm24sak-t-img
ARM24SAK-T10
1.1 in. (28 mm) Closed Loop Stepper Motor
Web Price $311.00
 arm24sak-t-img
ARM24SAK-T20
1.1 in. (28 mm) Closed Loop Stepper Motor
Web Price $311.00
Frame Size - 1.1 in
Motor Length - 1.77 in. - 1.77 in. - 2.78 in. - 2.78 in. - 2.78 in.
Driver Voltage Input Power - DC
Speed-Torque Characteristics -
Speed - Torque Characteristics
 		-
Speed - Torque Characteristics
 		-
Speed - Torque Characteristics
 		-
Speed - Torque Characteristics
 		-
Speed - Torque Characteristics
Holding Torque - 7.8 oz-in - 7.8 oz-in - 28 oz-in - 42 oz-in - 56 oz-in
Shaft/Gear Type - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Taper Hobbed Gear - Taper Hobbed Gear - Taper Hobbed Gear
Gear Ratio (X:1) - - - 7.2 :1 - 10 :1 - 20 :1
Backlash - - - 60 arc min (1°) - 60 arc min (1°) - 60 arc min (1°)
Lost Motion -
Shaft - Single - Double - Single - Single - Single
Electromagnetic Brake - Not Equipped
Permissible Speed Range (r/min) - - - 0 ~ 416 - 0 ~ 300 - 0 ~ 150
Rotor Inertia - 0.06 oz-in²
RoHS Compliant - These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards - CE
Permissible Overhung Load - 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb - 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb - 0 in. from Shaft End = 3.3 lb0.2 in. from Shaft End = 3.8 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 5.1 lb - 0 in. from Shaft End = 3.3 lb0.2 in. from Shaft End = 3.8 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 5.1 lb - 0 in. from Shaft End = 3.3 lb0.2 in. from Shaft End = 3.8 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 5.1 lb
Permissible Thrust Load - 0.33 lb - 0.33 lb - 2.20 lb - 2.20 lb - 2.20 lb
Permissible Thrust Load -