Para Inglés o Español:
Para japonés:
Clientes de Mexíco:
Servicio Al Cliente - +001-847-871-5931
Soporte técnico - 01-800-681-5309
Clientes Internacionales:
+1-847-871-5931 o
+1-310-715-3304
Para soporte en productos del catálogo japonés:
1-800-746-6872 o
+1-310-715-3304
El contenido a continuación está en inglés
- Large-Diameter, Hollow Output Table
- Direct Coupling
- Accurate Positioning
- Shorter Positioning Time
- Easy Home Operation
- Package includes 3 m (9.8 ft.) motor cable.
Frame Size |
- 5.12 in130 mm |
Power Supply |
- Three-Phase 200-230 VAC |
Shaft |
- Single |
Electromagnetic Brake |
- Equipped |
Output Table Supporting Bearing |
- Cross-Roller Bearing |
Permissible Torque |
- 106 lb-in12 N·m |
Inertia |
- 189500×10-7 kg·m²1040 oz-in² |
Permissible Speed (r/min) |
- 200 |
Gear Ratio (X:1) |
- 18 :1 |
Max. Holding Torque |
- 106 lb-in12 N·m |
Resolution |
- 9000 P/R (0.04±/step), 18000 P/R (0.02±/step), 90000 P/R (0.004±/step), 180000 P/R (0.002±/step) |
Frequency |
- 50/60 Hz |
Input Current |
- 1.40 A |
Control Power Supply |
- 24 VDC±5% 0.5 A |
Repetitive Positioning Accuracy (sec) |
- ±15 sec (±0.004°) |
Lost Motion |
- 2 sec (0.033°) |
Angular Transmission Accuracy |
- 3 sec (0.05°) |
Permissible Thrust Load |
- 2000 N450 lb |
Permissible Moment Load |
- 50 N·m440 lb-in |
Runout of Output Table Surface |
- 0.015 mm0.0006 in. |
Runout of Output Table Inner (Outer) Diameter |
- 0.015 mm0.0006 in. |
Parallelism of Output Table |
- 0.03 mm0.0012 in. |
Degree of Protection |
- [Actuator] IP40 (IP20 for motor connector) [Driver] IP20 |
Insulation Class |
- 130 (B) |
Insulation Resistance (Actuator) |
- 100 M Ω minimum when measured by a 500 VDC megger between the Case - Electromagnetic Brake Windings (for brake type) |
Dielectric Strength (Actuator) |
- No abnormality is found with the following application for 1 minute: Electromagnetic Brake Windings 1.5 kV, 50 Hz or 60 Hz |
Ambient Temperature (Actuator) |
-
0 ~ +50°C (+32 ~ 122°F)(non-freezing) 0 ~ +40°C (+32 ~ 104°F)(non-freezing) when home-sensor set (accessory is attached) |
Ambient Temperature (Driver) |
- 0 ~ +50°C (+32 ~ +122°F) (non-freezing) |
Ambient Humidity |
- 85% max. (non-condensing) |
Operating Atmosphere |
- Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Safety Standards |
- CE |
RoHS Compliant |
- Yes |
Components |
- ARD-S (Driver) DGM130R-ARMC (Actuator) |
|
|
|
|
|
|
