Para Inglés o Español:
Para japonés:
Clientes de Mexíco:
Servicio Al Cliente - +001-847-871-5931
Soporte técnico - 01-800-681-5309
Clientes Internacionales:
+1-847-871-5931 o
+1-310-715-3304
Para soporte en productos del catálogo japonés:
1-800-746-6872 o
+1-310-715-3304
El contenido a continuación está en inglés
- Driver sold separately
- Designed for continuous operation
- Lower heat generation
- Low vibration
- High response
- No hunting
- No gain tuning
Product Line |
- Oriental Motor ® |
Motor Type |
- Closed Loop |
Frame Size |
- 1.65 in42 mm |
Motor Length |
- 2.68 in.68 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 Speed - Torque Characteristics |
Holding Torque |
- 42 oz-in0.3 N·m |
Shaft/Gear Type |
- Round Shaft (No Gearhead) |
Shaft |
- Double |
Electromagnetic Brake |
- Not Equipped |
Resolution (Resolution Setting: 1000 P/R) |
- 0.36 °/Pulse |
Rotor Inertia |
- 0.32 oz-in²58×10-7 kg·m² |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CSA EN CE |
CE Marking |
- Low Voltage Directives EMC Directives |
Insulation Class |
- Class B [130°C (266°F)] |
Insulation Resistance |
-
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
-
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
-
-10 ~ 50°C (14 ~ 122°F) (non-freezing) (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 9.84 x 9.84 in., 0.24 in. thick is installed.) |
Ambient Humidity |
- 85% or less (non-condensing) |
Operating Atmosphere |
- No corrosive gases, dust water or oil |
Degree of Protection |
- IP20 |
Stop Position Accuracy |
- ±4 arc minutes (±0.067°) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
- 0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb0 mm from Shaft End = 35 N5 mm from Shaft End = 44 N10 mm from Shaft End = 58 N15 mm from Shaft End = 85 N |
Permissible Thrust Load |
- 1.03 lb4.60 N |
|
|
|
|
|
|
|
|
Drivers |
-
ARD-A, AR Series Driver (Single-Phase 100-115 VAC) ($590.00) ARD-C, AR Series Driver (Single-Phase 200-230 VAC) ($590.00) ARD-S, AR Series Driver (Three-Phase 200-230 VAC) ($590.00) |
Accessories - Mounting Brackets |
-
PAF0P, Mounting Plate ($13.00) PAL0PA, Mounting Bracket ($16.00) |
Accessories - Motor Cables |
-
CC010VAF, Motor Cable (3.3 ft. [1 m]) ($61.00) CC020VAF, Motor Cable (6.6 ft. [2 m]) ($74.00) CC030VAF, Motor Cable (9.8 ft. [3 m]) ($88.00) CC050VAF, Motor Cable (16.4 ft. [5 m]) ($114.00) CC070VAF, Motor Cable (23 ft. [7 m]) ($140.00) CC100VAF, Motor Cable (32.8 ft. [10 m]) ($180.00) CC150VAF, Motor Cable (49.2 ft. [15 m]) ($246.00) CC200VAF, Motor Cable (65.6 ft. [20 m]) ($312.00) |
Accessories - Extension Cables |
-
CC010VAFT, Extension Motor Cable (3.3 ft. [1 m]) ($67.00) CC020VAFT, Extension Motor Cable (6.6 ft. [2 m]) ($80.00) CC030VAFT, Extension Motor Cable (9.8 ft. [3 m]) ($94.00) CC050VAFT, Extension Motor Cable (16.4 ft. [5 m]) ($120.00) CC070VAFT, Extension Motor Cable (23 ft. [7 m]) ($146.00) CC100VAFT, Extension Motor Cable (32.8 ft. [10 m]) ($186.00) |
Accessories - Flexible Couplings |
-
MCS140406, Flexible Coupling (4 mm to 6 mm) ($46.00) MCS140506, Flexible Coupling (5 mm to 6 mm) ($46.00) MCS140606, Flexible Coupling (6 mm to 6 mm) ($46.00) |
