Para Inglés o Español:
Para japonés:
Clientes de Mexíco:
Servicio Al Cliente - +001-847-871-5931
Soporte técnico - 01-800-681-5309
Clientes Internacionales:
+1-847-871-5931 o
+1-310-715-3304
Para soporte en productos del catálogo japonés:
1-800-746-6872 o
+1-310-715-3304
El contenido a continuación está en inglés
The AR Series adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AR Series (AC Input) Driver.
- Driver sold separately
- Designed for continuous operation
- Lower heat generation
- Low vibration
- High response
- No hunting
- No gain tuning
Product Line |
- Oriental Motor ® |
Motor Type |
- Closed Loop |
Frame Size |
- 1.65 in42 mm |
Motor Length |
- 4.7 in.119.5 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 Speed - Torque Characteristics |
Holding Torque |
- 426 oz-in3 N·m |
Shaft/Gear Type |
- Planetary Gear |
Gear Ratio (X:1) |
- 50 :1 |
Backlash |
- 15 arc min (0.25°) |
Shaft |
- Single |
Electromagnetic Brake |
- Not Equipped |
Resolution (Resolution Setting: 1000 P/R) |
- 0.0072 °/Pulse |
Permissible Speed Range (r/min) |
- 0 ~ 60 |
Rotor Inertia |
- 0.32 oz-in²58×10-7 kg·m² |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CSA EN CE |
CE Marking |
- Low Voltage Directives EMC Directives |
Insulation Class |
- [Motor] Class B [130°C (266°F)] |
Insulation Resistance |
-
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
-
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
-
-10 ~ 50°C (14 ~ 122°F) (non-freezing) (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 9.84 x 9.84 in., 0.24 in. thick is installed.) |
Ambient Humidity |
- 85% or less (non-condensing) |
Operating Atmosphere |
- No corrosive gases, dust, water or oil. |
Degree of Protection |
- IP54 (excluding the mounting surface and connector) |
Stop Position Accuracy |
- ±4 arc minutes (±0.067°) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
- 0 in. from Shaft End = 24 lb0.2 in. from Shaft End = 28 lb0.39 in. from Shaft End = 33 lb0.59 in. from Shaft End = 41 lb0 mm from Shaft End = 109 N5 mm from Shaft End = 127 N10 mm from Shaft End = 150 N15 mm from Shaft End = 184 N |
Permissible Thrust Load |
- 11.20 lb50 N |
|
|
|
|
|
|
|
|
Drivers |
-
ARD-A, AR Series Driver (Single-Phase 100-115 VAC) ($590.00) ARD-C, AR Series Driver (Single-Phase 200-230 VAC) ($590.00) ARD-S, AR Series Driver (Three-Phase 200-230 VAC) ($590.00) |
Accessories - Motor Cables |
-
CC010VAF, Motor Cable (3.3 ft. [1 m]) ($61.00) CC010VAR, Flexible Motor Cable (3.3 ft. [1 m]) ($100.00) CC020VAF, Motor Cable (6.6 ft. [2 m]) ($74.00) CC020VAR, Flexible Motor Cable (6.6 ft. [2 m]) ($136.00) CC030VAF, Motor Cable (9.8 ft. [3 m]) ($88.00) CC030VAR, Flexible Motor Cable (9.8 ft. [3 m]) ($172.00) CC050VAF, Motor Cable (16.4 ft. [5 m]) ($114.00) CC050VAR, Flexible Motor Cable (16.4 ft. [5 m]) ($244.00) CC070VAF, Motor Cable (23 ft. [7 m]) ($140.00) CC070VAR, Flexible Motor Cable (23 ft. [7 m]) ($316.00) CC100VAF, Motor Cable (32.8 ft. [10 m]) ($180.00) CC100VAR, Flexible Motor Cable (32.8 ft. [10 m]) ($424.00) CC150VAF, Motor Cable (49.2 ft. [15 m]) ($246.00) CC150VAR, Flexible Motor Cable (49.2 ft. [15 m]) ($604.00) CC200VAF, Motor Cable (65.6 ft. [20 m]) ($312.00) CC200VAR, Flexible Motor Cable (65.6 ft. [20 m]) ($784.00) CC300VAF, Motor Cable (98.4 ft. [30 m]) ($444.00) CC300VAR, Flexible Motor Cable (98.4 ft. [30 m]) ($1,144.00) |
Accessories - Extension Cables |
-
CC010VAFT, Extension Motor Cable (3.3 ft. [1 m]) ($67.00) CC010VART, Flexible Extension Motor Cable (3.3 ft. [1 m]) ($106.00) CC020VAFT, Extension Motor Cable (6.6 ft. [2 m]) ($80.00) CC020VART, Flexible Extension Motor Cable (6.6 ft. [2 m]) ($142.00) CC030VAFT, Extension Motor Cable (9.8 ft. [3 m]) ($94.00) CC030VART, Flexible Extension Motor Cable (9.8 ft. [3 m]) ($178.00) CC050VAFT, Extension Motor Cable (16.4 ft. [5 m]) ($120.00) CC050VART, Flexible Extension Motor Cable (16.4 ft. [5 m]) ($250.00) CC070VAFT, Extension Motor Cable (23 ft. [7 m]) ($146.00) CC070VART, Flexible Extension Motor Cable (23 ft. [7 m]) ($322.00) CC100VAFT, Extension Motor Cable (32.8 ft. [10 m]) ($186.00) CC100VART, Flexible Extension Motor Cable (32.8 ft. [10 m]) ($430.00) CC150VAFT, Extension Motor Cable (49.2 ft. [15 m]) ($252.00) CC150VART, Flexible Extension Motor Cable (49.2 ft. [15 m]) ($610.00) CC200VAFT, Extension Motor Cable (65.6 ft. [20 m]) ($318.00) CC200VART, Flexible Extension Motor Cable (65.6 ft. [20 m]) ($790.00) |
Accessories - Flexible Couplings |
-
MCS400810, Flexible Coupling (8 mm to 10 mm) ($104.00) MCS401010, Flexible Coupling (10 mm to 10 mm) ($104.00) MCS401012, Flexible Coupling (10 mm to 12 mm) ($104.00) MCS401015, Flexible Coupling (10 mm to 15 mm) ($104.00) |
