Para Inglés o Español:
Para japonés:
Clientes de Mexíco:
Servicio Al Cliente - +001-847-871-5931
Soporte técnico - 01-800-681-5309
Clientes Internacionales:
+1-847-871-5931 o
+1-310-715-3304
Para soporte en productos del catálogo japonés:
1-800-746-6872 o
+1-310-715-3304
El contenido a continuación está en inglés
| Items |
 /Asset/0ik-rk-round.jpg 0IK3A-BW3U 3 W (1/250 HP) Induction Motor (Single-Phase 110/115 VAC) Web Price $87.00
|
 /Asset/0ik3gn-rohs-img.jpg 0IK3GN-BW3U / 0GN3KA 3 W (1/250 HP) Induction Motor (3:1 Gear Ratio) (Single-Phase 110/115 VAC) Web Price $147.00
|
/Asset/0ik3gn-rohs-img.jpg 0IK3GN-BW3U / 0GN3.6KA 3 W (1/250 HP) Induction Motor (3.6:1 Gear Ratio) (Single-Phase 110/115 VAC) Web Price $147.00
|
/Asset/0ik3gn-rohs-img.jpg 0IK3GN-BW3U / 0GN5KA 3 W (1/250 HP) Induction Motor (5:1 Gear Ratio) (Single-Phase 110/115 VAC) Web Price $147.00
|
/Asset/0ik3gn-rohs-img.jpg 0IK3GN-BW3U / 0GN6KA 3 W (1/250 HP) Induction Motor (6:1 Gear Ratio) (Single-Phase 110/115 VAC) Web Price $147.00
|
|||||
| Frame Size | 1.65 in42 mm | |||||||||
| Output Power | 3 W (1/250 HP) | |||||||||
| Voltage (VAC) | Single-Phase 110/115 VAC | |||||||||
| Frequency (Hz) | 60 | |||||||||
| Current | 0.115 A [110 VAC] 0.118 A [115 VAC] | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 3 :1 | 3.6 :1 | 5 :1 | 6 :1 | ||||||
| Output Shaft Diameter | 5 mm | 3/16 in. | 3/16 in. | 3/16 in. | 3/16 in. | |||||
| Type | Lead Wire | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Rated Torque | 0.089 lb-in 0.01 N·m | 0.21 lb-in 0.024 N·m | 0.25 lb-in 0.029 N·m | 0.36 lb-in 0.041 N·m | 0.43 lb-in 0.049 N·m | |||||
| Rated Speed (rpm) | 3000 | 1200 | 1000 | 720 | 600 | |||||
| Permissible Load Inertia | 0.79 oz-in²0.144 × 10-4 kg·m² | 1.14 oz-in²0.20736 × 10-4 kg·m² | 2.20 oz-in²0.4 × 10-4 kg·m² | 3.17 oz-in²0.576 × 10-4 kg·m² | ||||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 9 lb10 mm from Shaft End = 40 N | 0.39 in. from Shaft End = 4.5 lb10 mm from Shaft End = 20 N | 0.39 in. from Shaft End = 4.5 lb10 mm from Shaft End = 20 N | 0.39 in. from Shaft End = 4.5 lb10 mm from Shaft End = 20 N | 0.39 in. from Shaft End = 4.5 lb10 mm from Shaft End = 20 N | |||||
| Permissible Thrust Load | 3.30 lb15 N | 3.30 lb15 N | 3.30 lb15 N | 3.30 lb15 N | ||||||
| Permissible Thrust Load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CSA CCC EN CE | |||||||||
|
|
||||||||||
